9YF 2200 / 1900 / 1700 Square Baler | PTO-Driven Hay & Straw Baling for Canadian Farms
9YF-1700/1900/2200 square baler for wheat straw, rice straw, alfalfa, and forage grass. Picking width up to 2,200 mm, 460×360 mm bale chamber, automatic rope baling. PTO-driven, towed-type. OEM export orders accepted.
9YF-2200 / 1900 / 1700 Square Baler — PTO-Driven, High-Density Straw & Forage Baling
Picking width up to 2,200 mm | Bale section 460 × 360 mm | Automatic rope baling | Towed-type, PTO driven
High-Efficiency Square Hay Baler for Forage Harvesting
The 9YF Series square baler is a mid-mounted, tractor-towed machine engineered for collecting and baling wheat straw, rice straw, corn stover, cotton stalks, and various forage grasses including alfalfa. Three models — 9YF-2200, 9YF-1900, and 9YF-1700 — cover picking widths from 1,700 mm to 2,200 mm, matching different row-spacing and field conditions without compromise.
All three models share a spring-tooth pickup, fork-feed mechanism, D-type double knotter, and automatic rope baling system, producing compressed bales in a 460 × 360 mm chamber cross-section. High bale density means more material per stack, cutting storage footprint by up to 30 % compared with loose straw and reducing per-unit transport cost significantly.
The machines operate equally well in paddy and dryland fields. Flat, stone-free ground delivers the best output, but the spring-tooth pickup handles uneven windrows reliably. Compact bales are convenient for livestock feed depots, straw recycling facilities, and biomass energy plants — making this agricultural baler a core piece of equipment for any commercial forage operation.
Why Choose Our 9YF Series Small Square Baler?
460×360 mm
Compression chamber for high-density, stackable bales
3 Models
1700 / 1900 / 2200 mm picking width for any field width
≥36.8 kW
Matching power range — compatible with most 50 HP+ tractors
Auto Rope
Fully automatic rope baling — no manual tying required
- Spring-tooth pickup at 3 widths: The spring-tooth reel lifts flattened or scattered windrows cleanly, even at higher ground speeds, reducing crop loss at the field edge compared with rigid-tine designs.
- Fork Feeding Mechanism: The fork feeder pre-compresses material before it enters the plunger chamber, producing firmer, more uniform bales with fewer voids — critical for buyers supplying livestock feed at a consistent quality grade.
- D-Type Double Knotter (×2): Two D-type knotters operate simultaneously, cutting tying cycle time roughly in half versus single-knotter designs and reducing the risk of missed ties on dense material.
- Towed PTO design: Simple three-point or drawbar hitching on standard tractors — no dedicated power unit needed. Servicing the driveline is straightforward; replacement parts for the PTO shaft, shear bolt, and pickup tines are stocked globally.
- Dual field compatibility: Designed for both paddy and dryland conditions, the frame clearance and wheel positioning allow operation without bogging on moist field edges after harvest.
- Low ownership cost: At a machine weight of 1,750–1,950 kg and no onboard engine to maintain, annual running costs are limited to consumables: twine, pickup tines, and knotter parts.
Technical Specifications of Our PTO-Driven Square Baler
| Елемент | Одиниця | 9YF-1700 | 9YF-1900 | 9YF-2200 |
|---|---|---|---|---|
| Назва моделі | — | 9YF-1700 Square Baler | 9YF-1900 Square Baler | 9YF-2200 Square Baler |
| Hitching Method | — | Towed-type (Drawbar) | ||
| Picking Width | мм | 1700 | 1900 | 2200 |
| Picker Structure | — | Spring Tooth Type | ||
| Feeder Structure | — | Fork Feeding Mechanism | ||
| Knotter Type | — | D-Type | ||
| Number of Knotters | pc | 2 | ||
| Compression Chamber (W×H) | мм | 460 × 360 | ||
| Метод пресування | — | Automatic Rope Baling | ||
| Matching Power Range | кВт | 29.5 – 73.5 | 36.8 – 73.5 | ≥ 36.8 |
| Overall Dimension (L×W×H) | мм | 4965 × 2500 × 1750 | 4965 × 2640 × 1750 | 5700 × 2800 × 1780 |
| Вага машини | кг | 1750 | 1850 | 1950 |
Advanced Components of the Agricultural Baler
Every part of the 9YF series is selected or designed to reduce downtime and maintenance cost over a working life of 10+ seasons. Here is what is under the hood:
Spring-Tooth Pickup Reel
Hardened spring steel tines lift crop at the root level, minimising soil contamination in the bale. Tine spacing is calibrated for both fine alfalfa stems and coarser corn stover without blockage.
Fork Feeding Mechanism
The fork-type pre-feeder charges the plunger chamber in consistent, measured flakes. This produces uniform plunger loading, which directly controls bale weight variation — typically less than ±5 % batch-to-batch.
D-Type Double Knotter
Two synchronised D-type knotters tie each bale simultaneously with twine from both sides, creating a secure crossed wrap. The knotter cams are hardened and can be individually adjusted without removing the assembly.
Heavy-Duty Plunger & Flywheel
The cast steel plunger is guided on four wear-resistant slide rails, maintaining consistent chamber alignment throughout the stroke. The flywheel stores and releases energy smoothly, reducing PTO torque spikes during dense-material surges.
Adjustable Bale Length Gate
The star-wheel counter trips the knotter at a user-set bale length, allowing the operator to adjust finished bale length from roughly 400 mm to over 1,200 mm to match stacking and handling requirements at their facility.
Robust Welded Chassis
The main frame is fabricated from high-strength structural steel and stress-relieved before painting. Ground clearance is adequate for field ridges typical in paddy cultivation, and the tandem axle setup distributes load evenly on soft soil.
A Versatile Square Baler for Hay, Straw, and Alfalfa
The 9YF series small square baler is built for the high-throughput demands of the "Three Summers" and "Three Autumns" harvest windows, where days lost to slow baling directly reduce income. Below are the core application scenarios where buyers deploy these machines commercially:
Wheat & Rice Straw Baling
The most common use case. After combine harvesting, the 9YF picks up the windrow directly and produces bales ready for straw recycling plants or livestock bedding contractors.
Alfalfa & Forage Grass
High-value hay for dairy and beef operations. Dense baling at 460 × 360 mm preserves leaf content and reduces moisture entry, maintaining nutritional quality during 6–12 month storage.
Corn Stover & Cotton Stalks
The fork feeder handles coarser, bulkier material without bridging. Baled corn stover is increasingly demanded by biogas and mushroom-substrate buyers, who require consistent bale dimensions for automated feeders.
Animal Husbandry & Feed Depots
Compact square bales stack efficiently in standard 6 × 3 m barn bays. The uniform cross-section allows mechanical bale handling, cutting labour cost at feed depots processing 500+ bales per day.
Contract Baling Services
Agricultural contractors offering custom baling per hectare will find the 9YF-2200's 2,200 mm wide pickup and higher weight (1,950 kg) particularly suitable for large-acreage, high-output days.
Biomass & Straw Recycling
Power plants and briquette manufacturers buying straw by the tonne prefer suppliers who can deliver dimensionally consistent OEM tractor baler square bales that feed their processing lines without re-handling.
Complete Your Hay Harvesting Line
A square baler works best when paired with the right upstream equipment. Before baling, cut and condition your crop with a purpose-built
trailed mower conditioner
that wilts the swath uniformly — reducing baling moisture and improving bale density. For power transmission between your tractor and the baler, a high-quality
PTO drive shaft
with overrunning clutch protection prevents drivetrain shock loads when the plunger encounters dense material pockets. Sourcing both from proven suppliers reduces downtime during the critical harvest window.
Frequently Asked Questions about Square Balers
What tractor HP is needed to run the 9YF square hay baler?
The 9YF-1700 works from 29.5 kW (~40 HP). The 9YF-1900 and 9YF-2200 require ≥36.8 kW (~50 HP). All three use standard 540 RPM PTO drive. Most 50–100 HP utility tractors are compatible.
What crops can this agricultural baler handle?
Wheat straw, rice straw, corn stover, cotton stalks, alfalfa, and mixed forage grass. Best results on dry or conditioned windrows; avoid baling material above 20 % moisture to prevent knotter failures and mould in stored bales.
Can I adjust the bale length on the PTO-driven square baler?
Yes. The star-wheel actuator allows bale length adjustment from approximately 400 mm to 1,200 mm without tools. Set a shorter length for manual-handling bales; a longer setting maximises output per knotter cycle.
Which model suits large-field contract baling operations?
The 9YF-2200 with its 2,200 mm pickup and 1,950 kg build is the preferred choice for high-volume contract work. The wider reel covers more ground per pass and suits windrows left by wide-cut mowers above 2 m.
Do you support OEM orders and export to international markets?
Yes. We supply OEM custom square baler units with private labeling and CE/export documentation to buyers in Australia, the Netherlands, Brazil, South Korea, and more. MOQ and lead times are discussed per order at RFQ stage.
Get a Quote for the 9YF Square Baler — Ships to 30+ Countries
Tell us your crop type, field size, and preferred tractor HP. We'll recommend the right model and send a detailed quotation within 24 hours.
CE documentation, operation manuals, and spare-part lists included with every export order.
ISO 9001 certified · Export packing standard · OEM / ODM accepted
Complete Your Agricultural Equipment Line
Pair the 9YF square baler with compatible upstream and downstream equipment sourced from the same supplier network:
9GQY-3.2 — conditions and wilts crop before baling for lower moisture bales
Overrunning clutch & shear bolt types — direct tractor-to-baler power transfer
Round Balers
Variable-chamber round balers for silage and large-volume forage operations
All 9YF Series square balers are manufactured to ISO 9001 standards and available with CE documentation for export. © Ever-Power Agricultural Machinery Group.
Додаткова інформація
| edited | wm |
|---|
