9YF-2200S Square Baler for High-Efficiency Crop Baling
Can’t bale lodged or upright corn and sorghum stalks? The 9YF-2200S square baler with hammer-claw pickup and built-in shredder crushes and bales hard stalks in one pass. 2,200 mm pickup width, 460×360 mm chamber. OEM export orders accepted.
9YF-2200S Square Baler with Shredding Mechanism — Straw Crushing & Baling in One Pass
Hammer-Claw pickup | Single shredding unit | 460×360 mm bale chamber | 2,200 mm picking width | ≥73.5 kW PTO
Premium 9YF-2200S Square Baler for Efficient Forage Harvesting
The 9YF-2200S is a tractor-towed square baler built for operations that need more than simple pickup-and-tie. Its integrated single shredding mechanism crushes and shreds hard-stalk crops — corn, sorghum, cotton — before compression, producing denser, more uniform bales than a conventional pickup-only machine achieves on the same material. The result is a bale that stores better, transports more efficiently, and feeds more consistently into downstream processing equipment.
Critically, the 9YF-2200S is currently one of the few machines on the market capable of reliably picking up and baling upright, lodged, or laid-flat corn, sorghum, cotton, and wheat stalks — a practical advantage during seasons when heavy rain or wind pushes crops to the ground before harvest. Moisture suitability ranges from 10–23 % for cereal straw and corn stalks, and 17–23 % for legume and grass forage, keeping the machine productive across variable field conditions.
At 2,350 kg and an overall length of 6,240 mm, the 9YF-2200S is sized for commercial-scale straw recycling operations, animal husbandry feed depots, and contract baling businesses serving both paddy and dryland fields. The shredding function also makes baled corn stalks directly usable as animal feed or biogas feedstock without secondary processing.
Looking for a Hammer-Claw Type Square Baler? Here Is What Sets It Apart.
Most square balers use a spring-tooth pickup that lifts crop without altering its structure. The 9YF-2200S replaces this with a hammer-claw type picker paired with a single-stage shredding unit. The difference matters most on crops with high lignin content — corn stover, sorghum stalks, and cotton stems — where untreated material produces low-density bales that collapse on the stack.
Hammer-Claw Pickup
Hardened hammer-claw tines aggressively grip upright, lodged, and laid-flat stalks at the base, feeding them into the shredding rotor without the crop needing to be in a tidy windrow. This allows baling directly behind a combine or in storm-flattened fields.
Single-Stage Shredding Mechanism
The shredder crushes and frays hard stalks before they enter the compression chamber. Crushed fibre compacts significantly more tightly than whole stalk, so the 460×360 mm chamber produces denser bales on corn and sorghum than a standard baler of the same cross-section could achieve.
Fork Feeding Mechanism
After shredding, the fork feeder meters pre-compressed flakes into the plunger chamber in controlled charges, maintaining consistent plunger loading and bale weight uniformity across variable crop density — a key quality requirement for buyers supplying automated feed lines.
D-Type Double Knotter
Two synchronised D-type knotters tie both sides of the bale simultaneously with automatic rope baling, eliminating manual tying. Cam timing is individually adjustable without disassembling the knotter housing, reducing field adjustment time.
Multi-Moisture Capability
The shredding unit handles stalk material at 10–23 % moisture and forage at 17–23 % without blockage, while soil moisture up to 25 % with slopes ≤8° is tolerated — extending the seasonal baling window compared with spring-tooth-only machines.
Heavy-Duty Frame at 2,350 kg
At 2,350 kg, the 9YF-2200S is built heavier than standard square balers to absorb shredder vibration and plunger impact loads simultaneously. The stress-relieved welded chassis keeps frame fatigue out of the field across 10+ working seasons.
Technical Specifications of the Towed-Type Agricultural Hay Baling Machine
| இல்லை. | பொருள் | அலகு | விவரக்குறிப்பு |
|---|---|---|---|
| 1 | மாதிரி பெயர் | — | Model 9YF-2200S Square Baler |
| 2 | Hitching Method | — | Towed-type (Drawbar) |
| 3 | Picking Width | மிமீ | 2,200 |
| 4 | Feeding Inlet Width | மிமீ | — |
| 5 | Picker Structure | — | Hammer-Claw Type |
| 6 | ஊட்டி அமைப்பு | — | Fork Feeding Mechanism |
| 7 | Knotter Type | — | D-Type |
| 8 | Number of Knotters | pc | 2 |
| 9 | Compression Chamber Section (W×H) | மிமீ | 460 × 360 |
| 10 | பேலிங் முறை | — | Automatic Rope Baling |
| 11 | Matching Power Range | கிலோவாட் | ≥ 73.5 (~100 HP) |
| 12 | Overall Dimension (L×W×H) | மிமீ | 6,240 × 2,760 × 1,700 |
| 13 | இயந்திர எடை | கிலோ | 2,350 |
Crop Moisture Operating Guide
Versatile Square Hay Baler Applications: From Straw to Alfalfa
The combination of hammer-claw pickup and shredding unit makes the 9YF-2200S applicable across a wider crop range than any spring-tooth-only square baler — including materials that are standing, lodged, or otherwise difficult to pick up cleanly. Here is how commercial buyers use it across different sectors:
Corn & Sorghum Stalks
The shredder crushes high-lignin stalks at 10–23 % moisture, producing dense bales suited for biogas feedstock, mushroom substrate, and direct livestock roughage use — eliminating the need for a separate grinder before feeding.
Lodged & Upright Wheat Straw
Hammer-claw tines pick up storm-flattened straw that spring-tooth pickups leave behind, allowing baling immediately after combine harvest regardless of whether the straw is standing or laid over.
Rice Straw
High-silica rice straw at 10–23 % moisture is handled cleanly. Dense baling makes rice straw practical for long-distance transport to paper pulp and briquette manufacturers.
Alfalfa & Dry Forage Grass
At 17–23 % moisture, the shredder conditions the swath as it enters the chamber, improving fibre interlocking within the bale and reducing leaf shatter loss compared with untreated pickup of dry alfalfa.
Cotton Stalks
Coarse, branching cotton stalks challenge conventional feeders. The hammer-claw breaker reduces branch diameter before the fork feeder meters the material, preventing the bridging that stops auger-feed designs cold.
Straw Recycling & Biomass
For buyers supplying power plants or briquette lines, shredded bales meter more evenly into automated feeders than whole-stalk bales, reducing feed interruptions on continuous-process equipment.
Pair With a Mower for a Complete One-Stop Harvest Line
For alfalfa and fresh forage grass applications, cutting and conditioning the crop before baling improves fibre structure and reduces pickup moisture to the ideal 17–23 % range. The
9GD-2.5 trailer-mounted disc mower
delivers a clean, even swath at 2.5 m cut width — matched well to the 9YF-2200S's 2,200 mm pickup — minimising windrow gathering work before the baler arrives. Sourcing both machines from the same supplier simplifies spare-parts management and warranty coordination.
Why the 9YF-2200S Outperforms a Standard Square Baler on Hard Stalks
10–23%
Operating moisture range for straw and corn stalks
2,200 mm
Picking width for wide windrow coverage per pass
460×360
mm bale chamber producing high-density, stackable bales
≥73.5 kW
PTO power requirement — compatible with 100 HP+ tractors
- Shred-and-bale in one pass: Eliminating a separate shredding operation before baling cuts the number of field passes required, reducing fuel consumption and soil compaction across the baling area.
- Lodged-crop capability: Most towed square balers require a clean, standing windrow. The 9YF-2200S picks up upright, lodged, and laid-flat stalks — reducing crop losses after storms without the cost of manual raking before baling.
- Higher bale density on hard stalks: Shredded and frayed corn stover compacts tighter in the 460×360 mm chamber than whole-stalk material. Denser bales stack more per truck load and resist weathering longer in outdoor storage.
- Feed-ready output: Shredded and baled corn stalks are directly usable as livestock roughage or biogas feedstock with no post-processing. This opens additional revenue streams for buyers who supply both energy plants and animal husbandry operations.
- OEM and export ready: The 9YF-2200S is available with CE documentation and export packaging for buyers in Australia, the Netherlands, South Korea, Brazil, and other markets. OEM labelling and private-brand options are negotiable per order.
Frequently Asked Questions about the 9YF-2200S Square Baler
What makes the hammer-claw type picker better for corn and sorghum stalks?
Hammer-claw tines physically break down stalk structure on pickup, feeding pre-fractured material into the shredder. This prevents the bridging and blockages that occur when whole hard stalks enter a standard spring-tooth baler's throat at high feed rates.
Can the 9YF-2200S bale lodged or storm-flattened crops without raking first?
Yes. The machine is specifically designed to pick up upright, lodged, or laid-flat corn, sorghum, cotton, and wheat stalks. No pre-raking is required, provided soil moisture is within 12–25 % and field slope is ≤8°.
What tractor HP is required, and does the PTO shaft come included?
A tractor with ≥73.5 kW (~100 HP) PTO output is required. A compatible PTO drive shaft with overrunning clutch is recommended to protect the drivetrain during shredder load spikes. Confirm shaft specifications with your tractor's PTO output before ordering.
Is the shredded bale output suitable for direct livestock feeding?
Yes. Shredded and baled corn stalks and sorghum are usable as cattle roughage without secondary processing. For dairy feed, pair with alfalfa bales from the same machine to vary the ration. The shredded texture also improves biogas digester efficiency compared with whole-stalk bales.
Get a Quote for the 9YF-2200S Square Baler — Ships Worldwide
Tell us your main crop, field conditions, and tractor HP. We'll confirm compatibility and send a full quotation within 24 hours.
CE documentation, operation manual, and spare-parts list included with every export order. OEM labelling available.
ISO 9001 certified · OEM / ODM accepted · 30+ export markets served
The 9YF-2200S Square Baler is manufactured to ISO 9001 standards. CE documentation available for all export orders. © Ever-Power Agricultural Machinery Group.
