{"id":549,"date":"2026-07-28T05:56:38","date_gmt":"2026-07-28T05:56:38","guid":{"rendered":"https:\/\/balerhay.com\/?post_type=product&p=549"},"modified":"2026-07-28T06:44:27","modified_gmt":"2026-07-28T06:44:27","slug":"9gs-5-0-trailed-double-blade-mower","status":"publish","type":"product","link":"https:\/\/balerhay.com\/ru\/product\/9gs-5-0-trailed-double-blade-mower\/","title":{"rendered":"9GS-5.0 Trailed Double-Blade Mower | 5.0m Dual Cutter Bar"},"content":{"rendered":"
\n

<\/p>\n

9GS-5.0 Trailed Double-Blade Mower \u2014 5.0 m Dual-Cutter Bar for High-Output Forage Harvesting<\/h2>\n

The 9GS-5.0 Trailed Double-Blade Mower<\/strong> is a reciprocating-cutter tow-behind mower designed for wheeled tractors rated between 20 kW and 30 kW (30 hp to 50 hp). Its defining feature is two independent cutter bars working side by side across a combined 5.0-metre working width. Each bar operates via a separate reciprocating drive at 540 r\/min PTO input and 1240 r\/min lateral output shaft speed \u2014 a dual-drive arrangement that keeps per-bar load manageable while doubling swath coverage compared with a single-bar machine.<\/p>\n

At working speeds of 6 km\/h to 7 km\/h, the 9GS-5.0 achieves 2.4 ha\/h to 2.8 ha\/h in field conditions \u2014 roughly double the throughput of a conventional 2.5 m single-blade unit of the same power class. The cutter bar height is controlled by the tractor’s hydraulic circuit, so the single operator manages travel, PTO engagement, and bar lift entirely from the cab seat. No additional ground crew is required.<\/p>\n

This machine complies with GB\/T10940-2008 (Reciprocating Mowers) and holds an Agricultural Machinery Trial and Appraisal Certificate<\/em>, confirming that the stated productivity and stubble-height figures are independently verified, not self-declared. It is suited to natural meadows and seeded forage plots on firm, clear ground. It is not designed for paddy fields, wetlands, dense woodland, or ground carrying heavy stone or tussock loads.<\/p>\n

\"9GS-5.0<\/p>\n

<\/p>\n

Key Advantages of the Pull-Type Twin-Rotor Mower<\/h2>\n

Buyers comparing this heavy duty double blade mower<\/strong> against single-bar alternatives will find the advantages concentrated in three areas: output rate, drivetrain reliability, and operator workload.<\/p>\n

\n
\n

5.0 m Swath in a Single Pass<\/p>\n

Two 2.5 m cutter bars span a combined 5.0 m without leaving an uncut strip between them. On a 10 ha block, the 9GS-5.0 completes the cut in roughly 3.6 to 4.2 hours where a single-blade machine would take 7 to 8 hours.<\/p>\n<\/div>\n

\n

Low-Entry Power Threshold \u2014 20 kW Minimum<\/p>\n

Despite the 5.0 m width, the matched power range starts at 20 kW (30 hp). The reciprocating bar design consumes significantly less energy per metre of cut than spinning disc alternatives, keeping the machine accessible to mid-range compact utility tractors.<\/p>\n<\/div>\n

\n

Hydraulic Bar Lift \u2014 No Manual Adjustment<\/p>\n

Both cutter bars connect to the tractor’s hydraulic circuit. The operator raises, lowers, and holds bar height from the cab. On long-field passes, this eliminates the stop-and-dismount cycle that slows productivity on manually adjusted machines.<\/p>\n<\/div>\n

\n

Independent Dual-Bar Drive<\/p>\n

Each cutter bar has its own lateral output shaft running at 1240 r\/min. If one bar encounters an obstruction and trips its overload protection, the other bar continues cutting. Downtime from a single-bar strike does not halt the entire machine.<\/p>\n<\/div>\n

\n

60\u201370 mm Consistent Stubble Height<\/p>\n

The shear-action reciprocating blades leave a 60\u201370 mm stubble across both bars simultaneously. This uniform residual height supports regrowth without scalping \u2014 important for stands intended for two or three cuts per season.<\/p>\n<\/div>\n

\n

750 kg \u2014 Stable Trailed Profile<\/p>\n

At 750 kg and 2800 \u00d7 5630 \u00d7 1500 mm in working configuration, the machine rides on its own axle and follows ground contours independently of the tractor. This reduces ballast requirements on the tractor front and improves lateral stability on gently rolling terrain.<\/p>\n<\/div>\n<\/div>\n

\"9GS-5.0<\/p>\n

Technical Specifications & PTO Drive Requirements<\/h2>\n

The table below covers every parameter a procurement or engineering team needs to verify tractor compatibility before placing a wholesale enquiry.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
#<\/th>\nParameter<\/th>\n\u0415\u0434\u0438\u043d\u0438\u0446\u0430<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\nCutter Structure<\/td>\n\u2014<\/td>\nReciprocating (dual bar)<\/td>\n<\/tr>\n
2<\/td>\nAttachment Type<\/td>\n\u2014<\/td>\nTrailed (tow-behind)<\/td>\n<\/tr>\n
3<\/td>\n\u041c\u043e\u0434\u0435\u043b\u044c<\/td>\n\u2014<\/td>\n9GS-5.0<\/td>\n<\/tr>\n
4<\/td>\nMatched Tractor Power<\/td>\n\u043a\u0412\u0442<\/td>\n20 \u2192 30 (30 hp \u2192 50 hp)<\/td>\n<\/tr>\n
5<\/td>\nWorking Width (combined)<\/td>\n\u043c<\/td>\n5.0<\/td>\n<\/tr>\n
6<\/td>\nMachine Dimensions (L \u00d7 W \u00d7 H)<\/td>\n\u043c\u043c<\/td>\n2800 \u00d7 5630 \u00d7 1500<\/td>\n<\/tr>\n
7<\/td>\nWorking Speed Range<\/td>\n\u043a\u043c\/\u0447<\/td>\n6 \u2192 7<\/td>\n<\/tr>\n
8<\/td>\nPTO Shaft Speed (input)<\/td>\n\u043e\u0431\/\u043c\u0438\u043d<\/td>\n540<\/td>\n<\/tr>\n
9<\/td>\nLateral Output Shaft Speed (per bar)<\/td>\n\u043e\u0431\/\u043c\u0438\u043d<\/td>\n1240<\/td>\n<\/tr>\n
10<\/td>\nAverage Stubble Height<\/td>\n\u043c\u043c<\/td>\n60 \u2192 70<\/td>\n<\/tr>\n
11<\/td>\nField Productivity<\/td>\nha\/h<\/td>\n2.4 \u2192 2.8<\/td>\n<\/tr>\n
12<\/td>\n\u0422\u0440\u0435\u0431\u0443\u044e\u0442\u0441\u044f \u043e\u043f\u0435\u0440\u0430\u0442\u043e\u0440\u044b.<\/td>\n\u0447\u0435\u043b\u043e\u0432\u0435\u043a<\/td>\n1<\/td>\n<\/tr>\n
13<\/td>\n\u0412\u0435\u0441 \u043c\u0430\u0448\u0438\u043d\u044b<\/td>\n\u043a\u0433<\/td>\n750<\/td>\n<\/tr>\n
14<\/td>\nCompliance Standard<\/td>\n\u2014<\/td>\nGB\/T10940-2008 (Reciprocating Mowers)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

PTO Compatibility Note:<\/strong> This machine requires a standard 540 r\/min PTO output. Confirm your tractor PTO stub size and spline count before ordering. For compatible PTO drive shafts, cross-joint assemblies, and driveline components, the agricultural drive shaft catalogue at driveshaftjoint.com<\/a> covers a broad range of stub sizes and torque ratings suited to this power class.<\/p>\n

<\/p>\n

High-Efficiency Applications for Canadian Farms & Rough Terrains<\/h2>\n

The 9GS-5.0 is positioned for operations where mowing area per day matters more than precision finish. As a trailed twin rotary slasher for large Canadian farms<\/strong>, it fits the following production environments:<\/p>\n