{"id":554,"date":"2026-07-28T06:07:10","date_gmt":"2026-07-28T06:07:10","guid":{"rendered":"https:\/\/balerhay.com\/?post_type=product&p=554"},"modified":"2026-07-28T06:17:56","modified_gmt":"2026-07-28T06:17:56","slug":"9gl-5-0-5-6-pull-type-mower-windrower-cut-rake-in-one-pass","status":"publish","type":"product","link":"https:\/\/balerhay.com\/fr\/produit\/9gl-5-0-5-6-pull-type-mower-windrower-cut-rake-in-one-pass\/","title":{"rendered":"9GL-5.0\/5.6 Pull-Type Mower Windrower | Cut & Rake in One Pass"},"content":{"rendered":"
\n

<\/p>\n

9GL-5.0\/5.6 Pull-Type Mower Windrower \u2014 Cut & Windrow in a Single Pass Across 5.0\u20135.6 m<\/h2>\n

The 9GL-5.0\/5.6 Pull-Type Mower Windrower<\/strong> is a tow-behind combination machine that cuts and rakes forage simultaneously \u2014 two field operations completed in one pass. It connects to the rear PTO of a wheeled tractor rated between 30 kW and 60 kW (40 hp to 80 hp) and runs on rubber-tyred wheels that carry the machine’s own weight across the field. The cutter bar spans 5.0 m; the integrated raking unit sweeps a 5.6 m working width, gathering the freshly cut material into a continuous windrow ready for baling or collection without a second machine pass.<\/p>\n

As a trailed windrowing machine<\/strong>, the 9GL eliminates the separate raking operation that accounts for 30\u201340% of total hay-making field time on conventional two-pass systems. At 6 km\/h to 7 km\/h, the mowing function delivers 2.4\u20132.8 hm\u00b2\/h while the raking function simultaneously achieves 3.0\u20133.6 hm\u00b2\/h. The combined result is a clean 60\u201370 mm stubble and a tidy, uniform windrow in a single tractor circuit of the field.<\/p>\n

Both the cutter bar and the raking unit are raised and lowered by the tractor’s existing hydraulic circuit. The operator controls all functions from the cab seat \u2014 no second crew member is needed for the mowing or windrowing cycle. The machine is suited to flat grassland and gently sloping pastures. It is not intended for use on waterlogged ground, dense woodland, terrain with concentrated rock, or areas with heavy tussock concentrations.<\/p>\n

<\/p>\n

Core Advantages of the Tractor Drawn Hay Rake Mower<\/h2>\n

Buyers evaluating this tractor drawn hay rake mower<\/strong> against separate mower-plus-rake combinations will find the productivity and cost-per-hectare case straightforward:<\/p>\n

\n
\n

One Pass Replaces Two Field Operations<\/p>\n

Cutting and raking run concurrently. On a 30 ha block at 2.5 hm\u00b2\/h average, the combined pass takes roughly 12 hours. Running a separate rake after a separate mower on the same block would require 20\u201324 hours total \u2014 an extra day of weather exposure for the cut crop.<\/p>\n<\/div>\n

\n

78 Raking Tines at 71 mm Pitch<\/p>\n

The raking head carries 78 tines spaced at 71 mm pitch across the 5.6 m rake width. This close spacing produces a dense, consistent windrow without gaps or trailing wisps \u2014 important for baler pickup efficiency and uniform bale density.<\/p>\n<\/div>\n

\n

68-Blade Reciprocating Cutter Bar<\/p>\n

The horizontal cutter bar carries 68 individual blade sections across the 5.0 m cut width. The reciprocating shear action leaves a 60\u201370 mm stubble and consumes less energy per metre than spinning-disc alternatives, keeping the machine within the 30\u201360 kW tractor bracket.<\/p>\n<\/div>\n

\n

Hydraulic Lift on Both Working Units<\/p>\n

The cutter bar and raking unit each connect to the tractor hydraulic circuit independently. The operator raises both, either, or neither from the cab without stopping. Headland turns are completed with both units raised in under 10 seconds \u2014 no dismounting required between passes.<\/p>\n<\/div>\n

\n

Rubber-Tyred Trailing Chassis<\/p>\n

The machine rides on its own pneumatic rubber wheels, distributing its 1100 kg over a wide footprint. Ground pressure stays low enough to avoid significant soil compaction on firm pasture \u2014 a meaningful factor on high-value perennial stands targeted for three cuts per season.<\/p>\n<\/div>\n

\n

Compact Transport Footprint<\/p>\n

Transport dimensions of 3860 \u00d7 5600 \u00d7 3000 mm fold the working width from 7600 mm down to 5600 mm for road travel. Confirm transport width compliance with local road regulations before inter-site movement on public roads.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

2026 Technical Specifications & PTO Drive Requirements<\/h2>\n

The following table lists every parameter procurement teams and dealers need to verify tractor match and field suitability before placing a wholesale order.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
#<\/th>\nParameter<\/th>\nUnit\u00e9<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\nMod\u00e8le<\/td>\n\u2014<\/td>\n9GL-5.0 \/ 9GL-5.6<\/td>\n<\/tr>\n
2<\/td>\nAttachment Type<\/td>\n\u2014<\/td>\nTrailed (tow-behind, rubber-tyred)<\/td>\n<\/tr>\n
3<\/td>\nStructure de coupe<\/td>\n\u2014<\/td>\nReciprocating (horizontal blades)<\/td>\n<\/tr>\n
4<\/td>\nMowing Working Width<\/td>\nm<\/td>\n5.0<\/td>\n<\/tr>\n
5<\/td>\nRaking Working Width<\/td>\nm<\/td>\n5.6<\/td>\n<\/tr>\n
6<\/td>\nMatched Tractor Power<\/td>\nkW<\/td>\n30 \u2192 60 (40 hp \u2192 80 hp)<\/td>\n<\/tr>\n
7<\/td>\nPTO Shaft Speed<\/td>\nr\/min<\/td>\n540<\/td>\n<\/tr>\n
8<\/td>\nPlage de vitesses de travail<\/td>\nkm\/h<\/td>\n6 \u2192 7<\/td>\n<\/tr>\n
9<\/td>\nMowing Productivity<\/td>\nhm\u00b2\/h<\/td>\n2.4 \u2192 2.8<\/td>\n<\/tr>\n
10<\/td>\nRaking Productivity<\/td>\nhm\u00b2\/h<\/td>\n3.0 \u2192 3.6<\/td>\n<\/tr>\n
11<\/td>\nAverage Stubble Height<\/td>\nmm<\/td>\n60 \u2192 70<\/td>\n<\/tr>\n
12<\/td>\nNumber of Moving Blades<\/td>\npi\u00e8ces<\/td>\n68<\/td>\n<\/tr>\n
13<\/td>\nNumber of Raking Tines<\/td>\npi\u00e8ces<\/td>\n78<\/td>\n<\/tr>\n
14<\/td>\nTine Pitch<\/td>\nmm<\/td>\n71<\/td>\n<\/tr>\n
15<\/td>\nPoids de la machine<\/td>\nkg<\/td>\n1100<\/td>\n<\/tr>\n
16<\/td>\nDimensions \u2014 Transport (L \u00d7 W \u00d7 H)<\/td>\nmm<\/td>\n3860 \u00d7 5600 \u00d7 3000<\/td>\n<\/tr>\n
17<\/td>\nDimensions \u2014 Working (L \u00d7 W \u00d7 H)<\/td>\nmm<\/td>\n3860 \u00d7 7600 \u00d7 850<\/td>\n<\/tr>\n
18<\/td>\nOperators Required<\/td>\nperson<\/td>\n1<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

PTO & Driveline Note:<\/strong> This machine requires a rear-mounted 540 r\/min PTO output with a standard spline stub. Confirm your tractor’s PTO stub diameter and spline count before ordering. For a catalogue of compatible agricultural gearboxes and PTO driveline components<\/a> suited to this power and speed class, the metalite.net range covers a broad selection of sizes and torque ratings.<\/p>\n

<\/p>\n

High-Efficiency Windrowing for Canadian Farms & Rough Terrains<\/h2>\n

As a PTO driven trailed mower windrower for Canada<\/strong>, the 9GL-5.0\/5.6 is designed for farms where the harvest window is short and every hour in the field counts. The following applications represent the core use cases:<\/p>\n